Rocktron Velocity V50C - Manual (Page 5)

9
10
11
EQUALIZATION CONTROLS
8 BASS control
This knob controls the overall bass of both the CLEAN and DISTORTION channels. The BASS control
boosts or cuts the amount of low frequencies, or bass sound in the signal.
MIDDLE control
This knob controls the overall MIDDLE frequencies of both the CLEAN and DISTORTION channels.
The MIDDLE control boosts or cuts the amount of mid-band frequencies present in the signal.
TREBLE control
This knob controls the overall TREBLE of both the CLEAN and DISTORTION channels. The TREBLE
control boosts or cuts the amount of high frequencies present in the signal.
PRESENCE control
This knob controls the overall PRESENCE of both the CLEAN and DISTORTION channels. The PRES-
ENCE will increase or decrease the definition of the notes being played.
CHORUS button
The Chorus button activates the stereo chorus. When the button is pushed in the Chorus is ON. When the
button is out, the Chorus is OFF.
CHORUS DEPTH control
The Chorus Depth control adjusts the amount of modulation. Turning it clockwise increases the depth of
modulation. Turning it counter-clockwise decreases the depth of modulation.
CHORUS RATE control
The Chorus Rate control adjusts the speed of the modulation. Turning this control clockwise increases the
speed. Turning it counter-clockwise decreases the speed.
EFFECTS and CONTROLS
12
13
14
15
16
17
REVERB control
Adjusts the amount of reverb added to your guitar’s signal. Turn the knob clockwise to increase the effect.
HEADPHONE jack
Plugging your headphones into this jack disconnects the sound going to the speakers and allows you
to practice in private.
POWER switch
Turns the amp ON and OFF. When the LED is lit, the amp is on.