Daewoo DSL-15D3 - Manual (Page 11)

Preparation
AERIAL CONNECTION WITH VCR
Connect your
aerial cable to the RF(aerial) IN terminal on the VCR.
Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with RF cable.
NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR
channel on programme number “ZERO”using the “Manual tuning”function (See page 16).
Now you can watch the VCR in TV mode by selecting the programme number “PR00”.
11
RF IN RF OUT
VCR