Rocktron BASS60 - Manual (Page 4)

Input Jacks - HIGH & LOW
Using a standard guitar cable with a 1/4” jack - plug your bass into either jack. Select the
HIGH input for added “gain” or the LOW input for a smoother - softer gain structure.
GAIN Control
The control adjusts the overall “GAIN” or distortion of the signal.
TREBLE Control
This controls adjust the “high” frequencies of the sound.
MIDDLE - FREQUENCY & LEVEL Controls
The FREQUENCY control knob adjusts the midrange EQ sweep. The LEVEL control will
adjust the overall output of the frequency. This is a very useful feature which will allow you to
dial in all sorts of tones!
BASS Control
This control adjusts the low-end frequency of the signal.
MASTER VOLUME Control
This control adjusts the overall output of the amplifier.
LINE OUT Jack
Use this jack for recording, direct to a PA system, or to a power amplifier
HEADPHONE Jack
This 1/4” jack is used to connect to stereo headphones. Plugging into this automatically mutes
the speaker. This can also be used for direct recording as well in situations where you want to
mute the speaker while recording.
POWER - On/Off Switch
This turns the amplifier on and off. When the switch is “lit” then the amplifier is “on”.
1
2
3
4
5
6
7
8
9
Front Panel