Rocktron Celestial Delay - Manual (Page 6)

Descriptions continued.........
VOLUME Control - This control determines the amount of delay
mixed with the guitar signal.
REGENERATE Control -The control determines how many echo
repeats are created.
9VDC Input - This input jack provides 9VDC power to the pedal from
the Rocktron DC OnTap 9V power supply (sold seperately).
TIME Control - This control determines the delay time dependent on
the Delay Length and Multiplier switch settings.
MULTIPLIER Switch - This switch allows you to double the delay
length you have chosen with the DELAY LENGTH switch. When the
switch is out the delay lengh is doubled.
DELAY LENGTH Switch - This switch allows you to select a FAST
for a short delay range or SLOW for along delay range.
INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into
this jack.
ON/OFF Led - This LED shows if the pedal is on or off. When the
LED is light the pedal is on. When the LED is not light the pedal is
off.
FOOTSWITCH - Use this switch to turn on or off the pedal. The On/
Off Led will show you if the pedal is on or off.
OUTPUT Jack - This jack provides the mixed Delay effect with the
original signal.
1
2
3
4
5
6
7
8
9
10