Rocktron Mega Booster - Manual (Page 6)

Descriptions continued.........
MEGA BOOST Control - This control determines the amount of boost
added to the output.
9VDC Input - This input jack provides 9VDC power to the pedal from
the Rocktron DC OnTap 9V power supply (sold seperately).
ON/OFF Led - This LED shows if the pedal is on or off. When the
LED is light the pedal is on. When the LED is not light the pedal is
off.
INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into
this jack.
OUTPUT Jack - This jack provides the summed output of the effect.
Use a 1/4” guitar cable to plug into the next effect or into a guitar
amplifier.
FOOTSWITCH - Use this switch to turn on or off the pedal. The On/
Off Led will show you if the pedal is on or off.
1
2
3
4
5
6