Rocktron VII Deadly Sins Auto Wah - Manual (Page 7)

Descriptions continued.........
MODE Control - This control allows you to
select DOWN, MIDDLE or UP of the response
curve applied to the wah filter.
Q-SHAPE Control -The control determines the
width of the wah filter boost.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC
OnTap 9V power supply (sold seperately).
DEADLY SIN Control - This control
determines the threshold point at which the
wah will activate.
ON/OFF Led - This LED shows if the pedal is
on or off. When the LED is light the pedal is
on. When the LED is not light the pedal is off.
FOOTSWITCH - Use this switch to turn on or
off the pedal. The On/Off Led will show you
if the pedal is on or off.
1
2
3
4
5
6