Rocktron Reaction Super Booster - Manual (Page 7)

Descriptions continued.........
BOOST Control - This control determines the
amount of boost (gain) applied to the signal.
9VDC Input - This input jack provides 9VDC power
to the pedal from the Rocktron DC OnTap 9V power
supply (sold seperately).METAL
ON/OFF Leds - These LEDs shows if the pedal is on
or off. When the LED is lit the pedal is on. When
the LED is not lit the pedal is off.
BATTERY COMPARTMENT and COVER - The 9V
battery can be found in this compartment.
INPUT Jack - Using a standard 1/4” guitar cable,
plug your guitar into this jack.
THUMB SCREWS for Battery Compartment.
Unscrew these thumb screws to access the battery
compartment.
FOOTSWITCH - Use this switch to turn on or off
the pedal. The On/Off Led will show you if the
pedal is on or off.
OUTPUT Jack - Using a standard 1/4” guitar cable
you can plug in another pedal from this jack or plug
directly into your amplifier.
1
2
3
4
5
6
7
8