Rocktron Reaction Tremolo - Manual (Page 7)

Descriptions continued.........
SPEED Control - This control determines the
speed of the tremolo modulation.
ACTIVE LED - This LED provides visual
feedback to show you the speed and intensity of
the tremolo waveform.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC OnTap
9V power supply (sold seperately).
WAVEFORM SELECT Button - This button
allows you to select one of two different wave
forms - Triangle (which is the classic tremolo
sound) and Square (staccato) modulation
waveform..
INTENSITY Control - This control determines
the intensity of the tremolo waveform by
providing a mix between the input source and
effect output.
ON/OFF Leds - These LEDs shows if the pedal
is on or off. When the LED is lit the pedal is on.
When the LED is not lit the pedal is off.
1
2
3
4
5
6