How to change the battery – Rocktron Reaction Phaser User Manual
Page 11
How to change the battery:
To change the battery, remove the thumb screws
on the top of the pedal and remove the battery
compartment cover. Remove the old battery
and replace it with a new 9V Alkaline battery.
Replace battery in the same area as the old
battery was located. Place the battery compart-
ment cover on the pedal and re-insert the thumb
screws.
Save yourself tons of money in batteries by
using the Rocktron DC OnTap Universal Power
Supply to power this pedal (sold seperately).
The Rocktron DC OnTap provides a constant
flow of power to the pedal, unlike a battery
that will degrade over time. The Rocktron DC
OnTap Univeral Power Supply can also power
up to 20 pedals and can be used with both 110V
and 220V power sources.
Check, www.rocktron.com for more informa-
tion on the DC OnTap and where to purchase.