Rocktron Reaction Dynamic Filter - Manual (Page 7)

Descriptions continued.........
SENSITIVITY Control - This control
determines level of attack to cause the effect to
activate.
DISTORTION Switch - This switch adds
distortion to the effect. When the switch is in
the distortion is on. When out, the distortion
is off.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC
OnTap 9V power supply (sold seperately).
LEVEL Control - This control determines the
volume of the effect summed to the output.
ON/OFF Leds - These LEDs shows if the pedal
is on or off. When the LED is lit the pedal is
on. When the LED is not lit the pedal is off.
BATTERY COMPARTMENT and COVER
The 9V battery can be found in this
compartment.
1
2
3
4
5
6