Rocktron Hex Expression/Volume Pedal - Manual (Page 13)

Rocker Footpedal - Place your foot on the rocker footpedal
and rock it up and down (toe to heel - heel to toe) to work the
“ wah” effect.
INPUT Jack - using a standard guitar cable - plug your guitar
into this jack when using the pedal as a standard volume
controller.
PEDAL ROCKER TENSION ADJUSTMENT - This screw
will allow you to adjust the “action” of the pedal to suit your
taste with an allen wrench (not included). If you would like a
tighter or heavier movement of the pedal using an allen wrench
turn the screw clockwise. This will increase the torque and
tension on the rocker pedal. If you would like a smoother or
softer pedal movement turn the allen screw counter-clockwise.
This will loosen the tension on the pedal pivot point.
EXPRESSION Jack - using a 1/4” stereo RTS cable, plug into
the expression port in your MIDI footcontroller or your
expression port in your MIDI controllable device.
OUTPUT Jack - using a standard guitar cable, plug this output
into the next effect in your effect chain or directly into the
input of your guitar amplifier (see connection diagrams).
1
2
3
4
5
Function Descriptions