Rocktron Utopia B200 - Manual (Page 11)

11
3. UTOPIA B200 Top and Back Panels....continued.....
18 OUTPUT LEFT/MONO jack
This 1/4" jack provides the left output of the UTOPIA B200. This output is a MONO output and
should be used in mono situations, such as plugging into the front of an amplifier. For stereo
situations you must also use the OUTPUT RIGHT Jack.
19 AUX INPUT Jack
This 1/8" stereo jack provides an auxiliary input allowing you to plug a MP3 Player, CD Player,
etc. so that you can jam along with your favorite tunes.
20 PHONES jack
This 1/8” stereo jack provides a stereo output allowing you to practice in private. Note that you
need to activate the “STEREO” parameter in the GLOBAL Function in order to have a stereo
sound. Additionally, it is recommended that you set the Speaker Exciter in the GLOBAL Func-
tion to “LOCK BOTH” as well. Note, this setting will be used until you turn OFF the UTOPIA
B200. The SPEAKER Exciter setting used in each preset may be modified per preset while in
this mode. See page 22 for more information on the GLOBAL Function. Note: Make sure if you
edit a preset and plan to store it to turn the SPEAKER EXCITER off if you do not desire to store
its current status. All global parameters will be stored during the preset storing process.
21 USB jack
This standard USB jack allows you to connect to a computer for direct recording and
playback.
22 MIDI IN jack
This *7-pin DIN connector receives MIDI information from the device which is transmit-
ting the MIDI commands for the B200 to execute.
23 MIDI OUT/THRU jack
This *7-pin DIN connector passes on the MIDI information that is received at the MIDI IN
jack to other MlDI-compatible devices via a MIDI cable. It also outputs MIDI data when
performing a memory dump.
*Note a standard 5-pin MIDI cable may be used.
24 POWER jack
This 4-pin DIN connector accepts power from the 9V/AC adaptor supplied with the B200.
25 POWER Switch
Use this switch to turn the UTOPIA B200 On and Off.