Rocktron PC Preamp GIS - Manual (Page 6)

19
Rear Panel
1 3" OUTPUT jack
This
3
" phone jack provides the main output of the GIS PC Preamp. All
processed signals, including those applied to the AUX inputs, will be fed to
this output.
This jack is configured for RTS operation, where T=left, R=right, and
S=GND.
2 7" OUTPUT jack
This
7
" phone jack provides the main output of the GIS PC Preamp to be
connected to the
7
" mic input of the sound card on the computer.
This jack is also configured for RTS operation, where T=left, R=right, and
S=GND.
3 RIGHT AUXiliary INput RCA jack
This RCA input provides external signal to the ring of the
3
" and
7
" OUTPUT
jacks (#1 and #2 above). The AUX INPUT LEVEL on the front panel
determines the overall level of the signal applied at this jack.
4 LEFT AUXiliary INput RCA jack
This RCA input provides external signal to the tip of the
3
" and
7
" OUTPUT
jacks (#1 and #2 above). The AUX INPUT LEVEL on the front panel
determines the overall level of the signal applied at this jack.
7 POWER jack
This 2.5mm pin jack accepts power from the 9VAC power adapter supplied
with the unit.