Rocktron Pulse Tremolo - Manual (Page 8)

Specifications
Maximum Input
Input Impedance
Current Consumption
Power Requirements
+4dBu
470K
25mA
DC9V>100mA built-in regulator
* CE Approved *
Hints and Tips:
Tremolo pedals usually sound better when placed after distortion
in the signal chain. However, the Pulse Tremolo can be used either
before or after the distortion. When you put the Pulse before the
distortion you will get a very cool tremolo effect where at first you
will not hear the tremolo effect until the chord or note starts to
decay or sustain...at this point you will start to hear the effect.
When the Pulse is placed after the distortion, when active, you will
hear the tremolo effect without volume ducking artifacts.
If using multiple pedals such as delays and other modulation
effects, try the Pulse Tremolo in different parts of the signal chain
until you find the sound you like best.
If you have an effects loop in your amplifier - try putting the Pulse
in the effects loop for a different sound (please follow all instruc-
tions in your amplifier manual when connecting to your effects
loop).