Desa DUALBRITE SH-5597 User Manual

Motion sensor light control, Operation, Rite

Advertising
background image

© 2006 DESA Specialty Products™

598-1162-01

D

UAL

B

RITE

®

Motion Sensor

Light Control

Model SH-5597

Features

• D

UAL

Z

ONE

™ Technology.

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• D

UAL

B

RITE

®

Timer.

• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

2 Wire

Connectors

Gasket

6 Screws

(3 sizes included)

Light Control

Requirements

• The Light Control requires 120-volts AC.
• If you want to use Manual Override, the control must

be wired through a switch.

Some codes require installation by a qualified
electrician.

• This product is intended for use with a junction box

marked for use in wet locations.

Mounting Strap

Mounting Bolt

2 Lamps

(installed)

OPERATION

* resets to Auto Mode at dawn.

TEST

TEST 1 5 20

ON-TIME

Off 3 6 Dusk to
Dawn

D

UAL

B

RITE

®

Put ON-TIME switch
on the sensor bottom
to TEST and the D

UAL

-

B

RITE

®

switch OFF.

MANUAL MODE

ON-TIME

TEST

1 5 20

... back on.

AUTO

1 Second OFF

then...

D

UAL

B

RITE

®

TIMER

Light comes on half bright for selected time after dusk
(Off, 3 hr., 6 hr., until dawn). If motion is sensed, the
light turns on full bright for the ON-TIME (1, 5, or 20
minutes) then returns to dim mode.

Move ON-TIME Switch to

1, 5, or 20 minutes

Mode Switching Summary

Flip light switch off

for one second then

back on*

MANUAL MODE

AUTO

TEST

Note: When first turned on wait about 1

1

/

2

minutes

for the circuitry to calibrate.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
position.

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

Rubber Plug

Plastic Hanger

Cover

Plate

Sensor

Lamp

Holders

This package includes:

Put the ON-TIME switch in the 1,
5, or 20 minute position.

Mode:

On-Time:

Works: Day Night

Test

5 Sec

x

x

Auto

1, 5, 20 min.

x

Manual

Until Dawn*

x

Advertising