Dual XNP553 - Manual (Page 4)

4
XNP - SBX SERIES INSTALLATION
Lighting Hook-Up Recommendations
The illuminite lighting elements of your XiN series products provide you with a unique
custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control
circuitry provides an extraordinary lighted-Hue illumination which allows great creative
opportunities for the beginner and seasoned custom installer alike. The interior of your
vehicle will never sound or look ordinary again. Let your imagination take you there.
The lighting features of all illuminite products require a 12 volt power source to operate.
The speaker has two distinct sets of input terminals. The first is labeled audio input
terminals and the second is labeled illuminite lighting inputs. The inputs are clearly
marked with a label positioned directly above the terminal housing. The polarity (+ and -)
indicators for each set of inputs also appear on these labels.
1. Do not connect Amplifier or any audio source to illuminite lighting inputs. Inputs are
designed for switched 12 volt power source only. More then 3V rms connected to
illumination inputs can cause permanent damage to the lighting elements.
2. See fig. 1a, (illustrates wiring diagram) be sure to maintain polarity. Be sure to connect
to a constant switched 12 volt source. Correct connection would be the positive (+) 12
volt wire to the Positive (+) illuminite Lighting input terminal and connect the Negative
(-) illuminite lighting input terminal to a good chassis ground.
Fig 1a
Notice: The Illuminite™ series LED illumination elements are not removable. There
are no serviceable parts inside or attached to the speaker assembly. The Illuminite™
series products are sensitive electronic devices. Removal or tampering with any part or
portion of the speaker and/or its assemblies will damage the product and void the limited
warranty.
Audio Input
Terminals Illuminite Lighting
Input Terminals
Lighting Hook-Up From Rear
Head unit
12 volt source
Ground