Royer Labs R-101 Shock Mount Band Replacement - Manual

R-101 Shock Band Replacement Instructions
Due to environmental conditions and natural properties, all elastic bands eventually require
replacement. Replacing the bands on the shock mount provided with the R-101 is an easy
process using the bands and o-rings provided in this replacement kit. Before beginning,
please check to make sure that you received all of the required and extra components:
• 3 shock bands (includes 1 extra)
• 10 small neoprene o-rings (includes 2 extra)
• 6 large neoprene o-rings (includes 2 extra)
1. Pull 1 st shock band straight and roll small o-rings onto band about !” from ends. Adjust
location of loops on the band such that the adhesive seam of the band is !” to the inside
of the o-ring location.
2. Fold band in half and roll 2 more small o-rings onto band about !” from ends.
Seam
Seam