RTA Products RTA-3309 User Manual
Page 5
RTA-3309
P.5
SCREWS
SCREWS
C
8PCS
3X15 MM
SCREWS
SCREWS
1PC
6X40 MM
D
SCREWS
SCREWS
8PCS
6X40 MM
D
11
12
2PCS
Left
2PCS
Right
13
14
14
13
12
11
4
4
5
SCREWS
SCREWS
2PCS
6X40 MM
B
4
5
6
7
7
7
Use Screws (B) to fix the Supporting
Tubes (5) to the Horizontal Tubes (4).
Paying attention to drawings
and directions in which parts
must be facing, attach the
fixed part of the Sliders (7)
Right and Left sides to
Left & Right (11&12) using
Screws (C).
Insert Bolt (D) on the holes of the Bottom
Panel (13) and secure it with the
screwdriver. Place the Back Panel (14)
over the Bolt (D) and secure
them tightening the connecting pieces
in the Back Panel (14).
Please pay attention, first insert the Bolts (D) on the inside face of the Left Panel (11) and secure them
with the screwdriver. Place the Bottom Panel and the Back Panel (13&14) over the bolts and tighten the
connecting pieces on the side of the Bottom Panel and the Back Panel (13&14). Finally insert the
Bolts (D) on the inside face of the Right Panel (12),secure them with the screwdriver and press them
over the holes of the Bottom Panel and the Back Panel (13&14), tightening the connecting piece on the
sides of the Bottom Panel and the Back Panel (13&14).