RTA Products RTA-S07 - Manual (Page 10)

P.10 RTA-S07
Screw Bolts (A) to the holes on the inside face of Top Drawer Front Panel (4)
and Middle Drawer Front Panel (21). Then assemble the Small Drawer Left &
Right Panels (1&2) to Top Drawer Front Panel (4) and Middle Drawer Front
Panel (21) as shown by turning the cam locks.
SCREWS
8PCS
6X40 MM A
9
1
2
4
1
2
21
10
5
1
2
1
2
5
Slide the Drawer Bottom Panels (5) thru the channels in between panels (1), (2) and (4) / (21) as shown.
Make sure the panel fits inside all the channels.
SCREWS
8PCS
4X35 MM B
11
6
2
1
1
2
6
Assemble the Small Drawer Back Panels (6) in between the Small Drawer
Left & Right Panels (1&2) using Screws (B) as shown.