Rupert Neve Satellite 5059 16x2+2 Mixer - Manual (Page 3)

3
Don’t operate your 5059 module in or around water! Electronic equipment and liquids are not
good friends. If any liquid is spilled, such as soda, coffee, alcoholic or other drink, the sugars and
acids will have a very detrimental effect. Sugar crystals act like little rectifiers and can produce
noise (crackles, etc.). SWITCH OFF IMMEDIATELY because once current starts to flow the
mixture hardens, can get very hot (burnt toffee!) and cause permanent and costly damage. If it gets
wet and you suspect that good clean water may have gotten in, immediately unplug the unit, and
remove it from the source of water. Please contact service as soon as possible at
[email protected] for resolution. Clean only with a dry cloth.
Don’t be tempted to operate a 5059 unit with the cover removed. The cover provides magnetic
screening from hum and R.F. stray fields, and also helps to direct heat away from the circuit boards.
5059 Block Diagram
TLA POST-FADE
C W
C W
B USS1 LT MIX B USS1 LT OPS
B USS1 SILK B USS 1 RT MIX B USS1 RT OPS
B USS2 LT MIX B USS2 LT OPS
B USS2 SILK B USS2 RT MIX B USS2 RT OPS
INSER T
GND
+IN
-IN
+SND
-SND
+NSRT
-INSRT
-
-
-
-
-
B USS1 LVL
B USS2 LVL
BUS S1 LT OUT
BUS S1 RT OUT
BUS S2 LT OUT
BUS S2 RT OUT
-2.5dB +10dB
CHANNEL 1 OF 16
BUS S1 LT
BUS S1 RT
BUS S2 LT
BUS S2 RT