Q-See QSW1001R - Manual (Page 14)

14
Exit Setup
Press MENU to exit directly.
Motion Detection Sensitivity
The motion detection sensitivity range is 01-99. The lower the value, the
lower the sensitivity is, the higher the value, the higher the sensitivity is.
(1) Press MENU to enter system main menu.
(2) Press LEFT/RIGHT to setup option and then press OK to confirm.
(3) Press LEFT/RIGHT to motion detect sensitivity option.
(4) Press OK to sensitivity setup interface and there are target value/current
value on the screen.
(5) Press UP/DOWN to set sensitivity and then press OK to return to the
setup