Voicegate – Digicom 8D5499 User Manual
Page 19
Digicom S.p.A.
Manual rev.2.0
Pag. 19
RIP
The information concerning the reading and the parameters setup of the RIP protocol are displayed in this
window.
RIP:
Enables/Disables the RIP
Silent Mode:
OnlyRX – It manages the routing table in reception only
RX+TX – It manages the routing table also in transmission
Rip2 Mode:
Multicast – It indicates if the RIP packets must be sent to the
defined multicast address 224.0.0.9 (RIPv2)
Broadcast – It indicates if the RIP packets must be sent to the
interface broadcast address (RIPv1 compliant).
Timer Rate:
Time in seconds. It shows the updating time of the internal tables.
Supply Interval:
Time in seconds. It shows the forwarding time of the routing tables.
Expire Time:
Time in seconds. It shows the time after which a route is removed
from the routing table.
Garbage Time:
Time in seconds. It shows the time after which an expired route is
removed from the internal tables.