Sonnox Oxford Inflator - Manual (Page 11)

3.2 Effect
Section 3 DESCRIPTION OF CONTROLS
3.2 Effect
Section
EFFECT fader
sets the amount of the overall Inflator effect that is applied to the programme, from
0% to 100%.
EFFECT value
shows the value in dB of the parameter set by the EFFECT fader. The value can be
modified by clicking in the window.
EFFECT meter
indicates the degree of average signal modification in real time, depending on
programme type and Inflator settings.
CURVE fader
modifies the processing characteristics and sonic effect of the Inflator.
CURVE value
shows the value in dB of the parameter set by the CURVE fader. The value can be
edited by clicking in the window.
CLIP 0dBr
when this button is selected, internal processing levels are restricted to the
equivalent of normal digital maximum. When de-selected, internal processing may
develop and process signals beyond the equivalent of digital maximum.
BAND SPLIT
selects processing on the direct full band signal or invokes a band splitting function
that processes the signal separately in the LF, MF and HF spectral regions.
IN This switches the Inflator process in and out for comparison purposes.
www.sonnox.com 11 Go
to
contents