Sonnox Pro-Codec - Manual (Page 4)

2 THE PRO-CODEC PLUG-IN –
AUDITIONING CODECS IN REAL-TIME
2 The
Pro-Codec
Plug-In
–
Auditioning
Codecs
in
Real-time
2.1 Auditioning
and
Comparing
Codecs
Insert the Plug-In; this can be on any track that contains
some audio material but is most sensibly used on the output
bus.
By default, the Pro-Codec Plug-In has only a single codec
loaded –
AAC-LC, CBR, 256 kbps . To change these settings,
just click on the row in the Codec
List to open the Codec
Settings Selector panel. To add another codec, click in one
of the four empty rows in the
Codec
List.
To copy codec settings to a new row, just Alt
+
click and
drag an existing codec row to an empty row.
To remove a codec, click the red ’X’ that appears when the
cursor is over a codec row.
When you start playback through the host, by default you
will hear the encoded audio (if the
MASTER IN button is
enabled).
To audition other codecs, click on the MON button for any
active codec row.
For glitch-less bypass, toggle the MASTER IN button. The
monitor LEDs at top right indicate codec or input as the
monitored signal.
www.sonnox.com 4 Go
to
top