Sonodyne AM41P - Manual (Page 17)

Description Command Response Parameter Description Valid Range Value Detail
Set Output Level %PLVL:xyy<CR> %PLVL=xyy<CR>
x Output Channel 1, 2, 3 or 4 1 or 2 for 2 channel
amplifiers
yy Output Level 00 to E1 hex 0.5dB steps where for
example:
01 = -100dB
C9 = 0dB
E1 = +12dB
Set Output Mute %PMUT:xyy<CR> %PMUT=xyy<CR>
x Output Channel 1, 2, 3 or 4 1 or 2 for 2 channel
amplifiers
yy Mute on/off 00 or 01 00 = Mute OFF
01 = Mute ON
Get Standby Mode %PGRN:??<CR> %PGRN=xx<CR> xx Mode 00 or 01
00 = Normal
01 = Standby mode
Set Standby Mode %PGRN:xx<CR> %PGRN=yy<CR>
xx Mode 00 or 01 00 = Normal
01 = Standby mode
yy Mode 00 or 01 00 = Normal
01 = Standby mode
Get Version Info %PVER:??<CR> %PVER=AMDxy00P,aabbcccc
xy Amplifier model 21, 22, 41 or 42 2100P, 2200P,
4100P, 4200P
aa FW Version
major
bb FW Version
minor
cccc FW Revision
Get Amp Status %PAMP:x??<CR> %PAMP=xyy<CR>
x Output Channel 1, 2, 3 or 4 1 or 2 for 2 channel
amplifiers
yy Status byte 00, 01 or 02 00 = Ok
01 = Thermal
Shutdown 2 = Fault
Shutdown
PAGE 17 AMD SERIES INSTALLATION AND OPERATION MANUAL
THIRD PARTY CONTROL PROTOCOL