Starrett 2000-24 Altissimo Electronic Height Gage - Manual (Page 4)

Unpacking
Starrett Altissimo Operation Manual Page 3 CAT 2000-24
Checking Contents
The Altissimo is delivered in a Cardboard Box that is specially fitted to provide protection from the shock, vibration
and moisture normally encountered during shipments. Keep this box for storage and future shipments of the tool.
Carefully check the contents to ensure that all items are there:
1. Height Gage
2. Probe, Ø.1875”
3. Probe Holder
4. Calibration Block
5. Wall Mounted AC Adapter/Battery Charger
6. Operation Manual
7. Report
a.) With the 2000-24 a Letter of Certification is supplied.
b.) With the 2001-24 an Inspection Report is supplied.
Unpacking
1. Lay the Box on a flat surface and open. Remove accessories.
2. Place the Altissimo carefully on a work surface and remove the plastic bag.
3. Wipe the bottom of the base before placing on a Surface Plate.
4. Use a 3/16” Hex Wrench to remove the Top Cover. (See Figure 1)
5. Use a 5/32” Hex Wrench to remove the Counterbalance Shipping Screw. (See Figure 2) Replace the screw in
the tapped hole next to the one from which it was removed.
6. Replace the Top Cover making the screw finger tight. Do Not Over Tighten Screw.