Summit Audio EQF-100 Tube Parametric Equalizer - Manual (Page 2)

Introduction
The Summit Audio EQF-100 Full Range Equalizer uses tube and solid state technologies
to produce the warm sounds associated with tubes while providing the reliability of solid
state devices. The EQF-100 is a passive equalizer followed by a vacuum tube amplifier to
overcome any gain loss. Connections are made by using three pin XLR connectors.
Features:
• Four bands of 7 switch selectable frequencies
• High and low filters, 3 frequencies each
• Balanced input
• Continuously variable boost or cut
• Individual in/out for each of the 4 bands
• Silent bypass switch
• 105 dB dynamic range
• 990 output stage (balanced or unbalanced)
• Three year warranty
• Transformerless signal path
• Hand crafted in the USA
Having found this manual, carefully unpack the EQF-100 and its power cord. Save the
carton and packing material should it be needed for future shipping. Before powering the
unit, read this manual, observing the cautions for high voltage. Proceed by doing the
following:
• Set the line voltage switch to the proper position
• Determine the proper fuse size by referring to the specifications
• Check for pilot lamp illumination when powered up