SVS SB-1000 - Manual (Page 8)

Line Level Inputs
These inputs are used for line level connections to the subwoofer. For a single
mono connection to an A/V receiver, use the R/LFE input. For 2-channel
applications, use both the L and R inputs.
Line Level Outputs
These outputs are used in 2-channel applications to high pass the signal being
sent to the loudspeaker amplifier. The line level outputs feature a fixed 80 Hz
12 dB/octave high pass filter.
High Level (Speaker Level) Inputs
This connection method is for 2-channel stereo applications where the
integrated pre/pro/amplifier only has high level (i.e., speaker level) outputs.
Main Power Switch
This switch turns the amplifier on and off. During normal operation, the main
power switch can be left on. It should be turned off during extended periods of
non-use, or when making signal connections to the subwoofer.
Power Cord Receptacle
The receptacle accepts the AC power cord.
Power Status Light (front panel)
The power status light is located on the front panel of the subwoofer in the
upper left corner. The light will illuminate blue when the amplifier is on. The
light will illuminate red when the amplifier is in standby mode.
6
7
8
9
10
11
11
AMPLIFIER FEATURES & CONTROLS
7