Taser Evidence-Sync - Manual (Page 10)

Page 10 of 86
Chapter 2: Installing EVIDENCE Sync Software
Note: Do NOT connect a TASER device to your computer at this step.
1. On your computer, close all open applications.
2. Launch your Web browser.
3. Go to
http://info.taser.com/syncregistration.html .
4. Fill out the information and click Submit (Figure 4).
Figure 4
You should receive a confirmation e-mail in 24–48 hours.
5. After receiving a confirmation e-mail, follow the instructions in the message.
6. Click
Download EVIDENCE Sync and follow the instructions.
7. When the installation is complete, click Finish to exit.