Taser X2 - Manual (Page 15)

15 Chapter 3 Features
Invalid Battery Pack. If you see a blinking exclamation point and battery icon, this
indicates that the CEW did not recognize the battery correctly. Remove the battery
pack and reinsert it. If the error is still present, try another battery pack. If the icon still
displays, this usually indicates that something has happened to the battery connector
inside the CEW and the CEW should be serviced. See the Product Returns section in
this manual for instructions.
An APPM battery pack is installed in the CEW. See the Automatic Shut-Down Performance
Power Magazine (APPM) Battery Pack section in this manual for more information.
A TASER CAM HD recorder is installed in the CEW. See the TASER CAM HD Operating
Manual for more information.
A TASER CAM HD recorder with the automatic shutoff (AS) feature is installed in the
CEW. See the TASER CAM HD Operating Manual for more information.
When you plug the USB connection into the X2 CEW, the USB connection status icon
will appear. See the USB Connection Status section in this manual for more information.
Operating Mode Icons
This is the icon for the Semi-Automatic mode. The CEW is shipped in Semi-Automatic mode.
This is the icon for the Manual mode.
Battery Level Icons
When the safety switch is in the up (ARMED) position, the CID will display the percentage of battery power
remaining. Remaining capacity will display in 20 percent increments.
When the battery level drops to 20 percent, TASER International recommends that the battery pack be replaced.
Battery
81– 100%
Battery
61– 80%
Battery
41– 60%
Battery
21– 40%