Tenqa SP-109 - Manual (Page 4)

2
Operating Instructions
Quick start
1. Insert the power adapter plug into the power socket (DC IN) on the side of the
SP-109 and plug it into a power outlet.
2. Turn the power switch on the side of the SP-109 to the ‘ON’ position.
3. After turning the SP-109 on, the blue LED indicator should flash intermittently
indicating the speaker is in “pairing mode.”
4. The speaker is now ready to connect to your Bluetooth® enabled device.
Please refer to your Bluetooth enabled device’s instruction manual for pairing
instructions if you are unsure how to do this.
Pairing the sP-109 with your Bluetooth a2DP enaBleD
MoBile Phone, iPoD touch®, iPhone™, or MP3 Player
Pairing creates a unique and encrypted wireless link between the SP-109 and other
Bluetooth enabled devices such as mobile phones, mp3 players, and computers.
Make sure that the Bluetooth function on your device is enabled (refer to the
device’s instruction manual) and in close proximity to the speaker.
• Turn the power switch to ‘ON’ on the side of the SP-109.
• Perform a device discovery scan for other Bluetooth devices from your device
(please refer to user guide).
• Select the device ‘SP-109’ in the list of discovered devices.
• Enter the Bluetooth® password “0000” to pair and connect the speaker to the
device.
• If the pairing is successful, after a few seconds the speaker will connect and
play audio from your music player.
aDjusting the VoluMe
To set the volume of the speakers, simply rotate the volume jog dial located on the
side of the Wireless Speaker.
answering anD Making Phone calls when streaMing
Music
If you receive a phone call while your mobile phone is connected to the SP-109,
your phone will indicate an incoming caller as normal according to your ringer
setting. Upon answering the call, the streaming audio will silence and you will hear
the audio as normal through your mobile phone. Upon completion of the call, your
SP-109_InstructionManual.indd 2 7/1/09 6:28 PM