Test Products International 126 - Manual (Page 23)

23
Standard Accessories Part No.
2 each 1.5 volt AA Batteries A002
Fuse, 0.5 Amp A104
Test Lead Set A040
Rubber Boot (126 only) A101
Optional Accessories Part No.
Deluxe Test Lead Set SDK1
IEC 1010 Deluxe Test Lead Kit TLS2000B
Temperature Adapter A301
Boot Hook A103
Soft Carrying Case A100
*These accessories have not been evaluated by UL and are not
considered as part of the UL Listing of this product.
E. ACCESSORIES*
22
i. RECORD MODE
The record mode saves minimum (MIN) and maximum
(MAX) values measured for a series of reading. Activate
the function as follows:
1. Depress the REC button on the 126.
2. The 126 will immediately start to record
MIN/MAX values. REC will be on the LCD to
show record mode has been activated. The
reading on the LCD will be the actual reading.
The 126 will give a confirmation beep every
time a new value is recorded.
3. Press the REC button a second time and the
MIN reading will be displayed.
4. Press the REC button a third time and the MAX
reading will be displayed on the LCD.
5. To terminate the record mode, hold the REC
button down for approximately 2 seconds or
turn the rotary switch to a different function.