Tiptop MIXZ - Manual (Page 4)

Example patch
4
Here is an example patch showing how versatile the MIXZ is. In this example the
MIXZ mixes two Z3000 on Mixer A, going into the Z2040 to make a thick bass
line. The output of the Z2040 then goes to Mixer B, Mixer B also takes in the
HATS909, SD808 and CP909 from the Bus Mix, the mix of all those voices then
goes into the Z-DSP for spatial processing using some stereo delay. In this patch
the BD909 was not enabled so it won’t mix with the other drums, (a good idea if
you run the mix through a delay). And there are still many channels left open on
the MIXZ to add addtional voices into the mix.