TracRac IM T-Rac Pro Toolbox Mount - Manual (Page 6)

6 T-Rac ToolBox Mount Kit INSTRUCTION MANUAL TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
7. You are now ready to attach the toolbox to the clamps using the supplied fasteners (See Figure 7).
8. Insert the fasteners through the washers and the holes in the toolbox, and thread into the mount clamps.
9. Torque the fasteners to 240 In-Lbs.
Figure 7. Toolbox attachment
Note: For tool boxes over 24” wide, or that are overloaded, it’s recommended that a strip of plywood or metal be used
between the toolbox and clamps, on each side, for support.
Head hex screw
Lock washer
T-Rac_TBMK_IM_12.12.06