Turning Technologies PresenterWare - Manual (Page 5)

PresenterWare 5
PRESENTERWARE FOR TURNINGPOINT CLOUD
AND TURNINGPOINT 5
Configuring PresenterWare for TurningPoint Cloud and
TurningPoint 5
The following settings must be configured in order for PresenterWare to connect to a PowerPoint Polling or Anywhere Polling
session.
1 Open TurningPoint Cloud/TurningPoint 5.
2 If using TurningPoint Cloud, sign in to your Turning Account.
3 Click Preferences in the lower right corner of the Dashboard.
4 Select Connections from the left panel.
5 Scroll to the PresenterWare section in the right panel.
6 Place a check in the box next to Enable PresenterWare Support.
7 Enter the network port number in the PresenterWare Port field. The default port is 6090.
8 Optionally, enter the presenting computer’s Bonjour Name.
TIP
To learn more about Bonjour zero-configuration, visit http://www.apple.com/support/bonjour/ .
Connecting the PresenterWare Device
PresenterWare is able to connect to the session once the configuration in TurningPoint Cloud/TurningPoint 5 is complete. The
steps below will establish a connection between PresenterWare and PowerPoint Polling or Anywhere Polling.
1 Open the PresenterWare application.
2 Enter the presenting computer’s Host (IP address) by expanding the + icon in
the upper right corner of the application.
l
Manually entered Hosts are displayed under Manual Hosts. To enter
a Manual Host, select the + icon and enter the presenting computer’s
Host. The presenting computer’s Host (IP address) can be found in
Preferences under PresenterWare.
l
Hosts running Bonjour are displayed under Discovered Hosts.
3 Tap the Host or Bonjour Name associated with the presenting computer.
l
A challenge code is displayed on the device when connecting to a
Host for the first time.
4 Open PowerPoint Polling or Anywhere Polling.
turningtechnologies.com/user-guides