Turning Technologies TurningKey User Manual
Page 16
Advertising
TurningKey User Guide
16
Standards
2
Select either the K-12 Standards tab or the Custom Standards tab.
3
Select the test version to apply the standards to from the Current Version drop-down menu.
4
Select the question in the left panel.
5
Select a standard from the list.
6
Select the right arrow button (>) to assign the standard to the question.
The standard displays in the list of current standards on the right side.
Remove a standard using the left arrow button (<).
7
Repeat steps 3 - 6 to add standards to additional questions.
To start over, select the Clear All button to clear all standards from every question in the question list.
8
When finished assigning standards, click Close.
Note
You can assign multiple standards or use multiple
Standards Lists.
Advertising