Ubiquiti Networks airFibe5X - Manual (Page 8)

Installation Overview
We recommend that you configure your paired AF-5X radios
before site installation. Below is an overview of the installation
with specific details in the following instructions:
• Connect the airFiber PoE Adapter to the DATA port, and
connect your computer to the MGMT port.
• Configure the AF-5X.
• Install a ground wire and mount the AF-5X on an
airFiber X antenna.
• At the installation site, install the airFiber X antenna with the
mounted AF-5X radio (see the antenna’s Quick Start Guide
for installation instructions).
• Secure the ground wire and mount the GPS antenna.
• Establish and optimize the RF link.
Connecting Power over Ethernet
1. Lift the release latch on the bottom of the AF-5X and slide
the Port Cover off.