Ubiquiti Networks airGriM - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™ airGrid® 2 GHz
High-Performance Integrated InnerFeed ™ Antenna. This Quick
Start Guide is designed to guide you through the installation, and
show you how to access the airOS® Configuration Interface. This
Quick Start Guide also includes the warranty terms and is for use
with the airGridM2 HP, model AG-HP-2G20.
Package Contents
Antenna Feed Feed Extender Grid Reflector
Rear Housing L-Bracket Pole Clamp M8 U-Bolt
2 GHz High-Performance Integrated InnerFeed Antenna Model: AG-HP-2G20
M8 Flange Nuts
(Qty. 2)
PoE Adapter
(24V, 0.5A)
Power Cord Quick Start Guide
Grid reflector and mounting hardware packaged separately. Products may be different from
pictures and are subject to change without notice.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable™
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.