Ubiquiti Networks RockeM - Manual (Page 2)

D
esign Guide
2
www.ubnt.com
© 2012 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti Networks and airSync are trademarks of Ubiquiti Networks, Inc. RR020212
Application Examples
When to use airSync
Co-Location Interference
Two co-located APs without airSync are transmitting
and receiving at the same time, causing a collision error. With airSync enabled, the APs transmit at the same time.
AP 1 Receives AP 2 Transmits
Collision/Error Collision/Error
Satellite Timing Reference
AP 1 Transmits AP 2 Transmits
When airSync shouldn’t be used
Station sees AP other than its own
with similar signal strength
AP sees Station from another AP
Excessive in-band noise from
sources outside the network
AP 1 AP 2
Station
AP 1 AP 2
Station 2
Station 1