Ubiquiti Networks RockeM - Manual (Page 4)

LED Panel
Signal In airOS, you can modify the wireless
signal strength threshold values for each LED on
the Advanced tab under Signal LED Thresholds,
or you can configure the LEDs to display the GPS
connection quality instead (RM5‑Ti only). The
default values are shown below:
LED will light green when the wireless
signal strength is above ‑65 dBm.
LED will light green when the wireless
signal strength is above ‑71 dBm.
LED will light green when the wireless
signal strength is above ‑77 dBm.
LED will light green when the wireless
signal strength is above ‑82 dBm.
LED will light green when the wireless
signal strength is above ‑88 dBm.
LED will light green when the wireless
signal strength is above ‑94 dBm.
GPS (RM5‑Ti only) The GPS LED indicates
airSync ™ activity. Requires three or more satellite
connections.
Secondary Ethernet The secondary Ethernet
LED will light steady green when an active
Ethernet connection is made to the Secondary
Ethernet port and flash when there is activity.
Main Ethernet The main Ethernet LED will
light steady green when an active Ethernet
connection is made to the Main Ethernet port and
flash when there is activity.
Power The Power LED will light green when the
device is connected to a power source.