Ubiquiti Networks RocketDis Antenna - Manual (Page 2)

Introduction
Thank you for purchasing the Ubiquiti Networks ™ RocketDish ™ ,
an airMAX ™ Carrier Class 2x2 PtP Bridge Dish Antenna.
This Quick Start Guide is designed to guide you through
the installation of the antenna. This Quick Start Guide also
includes the warranty terms and is for use with the RocketDish,
model RD-3G26.
Package Contents
Dish Reflector Antenna Feed Main Mounting Bracket
Protective
Shroud
Pole Clamps
(Qty. 2)
Stabilizer Brackets
(Qty. 2)
RF Cables
(Qty. 2)
Elevation Rod M10x150 Carriage Bolts
(Qty. 4)
M10x100 Bolts
(Qty. 2)
airMAX™ Carrier Class 2x2 PtP Bridge Dish Antenna
Model: RD-3G26
M10x25 Carriage Bolts
(Qty. 3)
M4 Bolts
(Qty. 4)
Quick Start
Guide
Products may be different from pictures and are subject to change without notice.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.