VAC Standard 220 User Manual
Page 4
Page 4
INSTALLING Standard 220
Physical requirements:
1)
Provide Adequate Ventilation-Allow at least three inches of free air space above and two
inches to either side of Standard 220.
2)
Do not place Standard 220 in a completely enclosed cabinet. If equipment cabinet has a solid
front door, a “boxer” fan will be necessary to ensure proper airflow.
3)
Do not stack other components (or any objects which could impede proper ventilation) on
top of Standard 220.
4)
Do not operate Standard 220 on carpet, or on any other surface that might restrict airflow.
5)
Standard 220’s chassis cover will become very warm during normal use.
6)
Standard 220 must be installed in a secure, sturdy, properly built (and ventilated) stand,
cabinet or enclosure. Standard 220 is heavy, and could inflict serious injury or property
damage if it falls, or if the stand upon which it is place tips over. This concern is particularly
important in households with small children who might try to climb furniture.