VAC Vintage Mk II - Manual (Page 6)

Care of Chassis & Face Plate
VAC chassis are aluminum for superior electromagnetic performance. The face plate is
finished in either highly polished black acrylic lacquer or a tough textured gloss powder coat
paint. This finish is durable but can be scratched or chipped, just as that of a fine automobile
may be damaged. Cleaning with a damp cloth WHILE THE AMP IS SWITCHED OFF
AND UNPLUGGED should suffice.
When shipping your VAC amplifier, be certain to wrap the face plate in the cloth or tissue
originally shipped from the factory. Take care to ensure that there are no ridges in the cloth.
Use of a harsher cloth or the presence of deep wrinkles in the cloth may result in abrasion
of the finish.
The brass plates on your amplifiers may have been shipped from the factory with a
protective film covering, which should be removed for best appearance.
Tube Cages (Optional)
Perforated metal cages are available to enclose the vacuum tubes and transformers. They
attach with the two black headed screws located on each side of the chassis.
Need Help?
Please call us with any questions you may have. It is better to ask than to guess.
Warranty
This amplifier is warranted for a period of thirty (30) days from the date of purchase. In
addition, if the registration card(s) is received by VAC along with a copy of your sales
receipt from an authorized VAC dealer within this thirty days, a service contract will be
extended to cover your equipment for two (2) years (except tubes which are covered for 90
days). Receipt of your registration card will be confirmed in writing by VAC.
This warranty applies only to units sold and operated in the United States of America
through authorized VAC dealers. For warranty information outside of the U.S. contact the
importer of VAC equipment for your country. Units sold outside of the U.S. should still be
registered with VAC.