Velodyne DEQ-R Series - Manual (Page 7)

www.velodyne.com DEQ-R Series User’s Manual - 1
CONGRATULATIONS
Congratulations on your purchase of a Velodyne Digital Equalization Remote (DEQ-R) subwoofer. This system
represents the state-of-the-art in low frequency reproduction. Read and follow the instructions below to ensure
safe and proper system operation..
Note: Do not leave unit in direct sunlight or use in high humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this product to rain or moisture. To avoid electrical shock,
do not open the speaker enclosure or amp chassis cover. Please observe all warnings on the equipment
itself. There are no user serviceable parts inside. Please refer all service questions to your authorized
Velodyne dealer.
Prior to Installation:
Please unpack the system carefully. Use caution when lifting or moving to avoid injury. Please save the carton
and all packaging materials for future use. Record the serial number in the space provided on page 19 for future
reference.
Product Features
• DSP-controlled
• Front mounted 8-segment LED display
• One-touch, 5-band graphic equalizer with microphone included
• 4 selectable presets for customized listening mode
• Night-mode setting
• Mute control
• Built-in 180 watt (RMS) power amplifier (DEQ-8R)
• Built-in 195 watt (RMS) power amplifier (DEQ-10R)
• Built-in 225 watt (RMS) power amplifier (DEQ-12R)
• Built-in 750 watt (RMS) power amplifier (DEQ-15R)
• Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer Direct setting
• Speaker-level inputs
• Line-level inputs
• Signal sensing auto turn on/off with bypass option
• Variable volume control with digital LED readout
• Selectable phase control (0, 90, 180, or 270 degrees)
• Dual staggered low-pass crossover; 12 dB/octave initial, 24 dB/octave ultimate
• Anti-clipping circuit
• Over excursion protection
• Slot loaded bass reflex design