Velodyne MicroVee - Manual (Page 13)

www.velodyne.com MicroVee User’s Manual - 7
A Word About The Auto On/Off Feature
when using a single channel input (such as a surround sound processor’s subwoofer out or lFe), the auto on/
off circuit sensitivity will be affected. When one input channel is used instead of two, the unit will see lower
signal levels present at the inputs. This may cause the unit to turn off inadvertantly when listening at low volume
levels and/or not “wake up” even when signal is present. If this occurs, simply use a “y” adapter (available from
most dealers) to allow your processor’s single sub line to be fed into both l&R inputs. This will make the unit
turn on at lower signal levels.