Velodyne SPL-800i - Manual (Page 7)

www.velodyne.com SPL-800i User’s Manual - 1
CONGRATULATIONS
congratulations on your purchase of a Velodyne subwoofer system. This system represents the state-of-the-
art in low frequency reproduction and will provide you with years of listening pleasure when properly cared for.
Read and follow this instruction manual to insure safe and proper system connection and operation.
Caution!
Please observe the following precautions to insure safe and proper system operation
Note: do not leave unit in direct sunlight or use in high humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do
not open speaker enclosure or amp chassis cover. Please observe all warnings on the equipment itself. There are
no user serviceable parts inside. Please refer all service questions to your authorized Velodyne dealer or service
representative.
Prior to Installation:
Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to avoid injury.
Remove all staples used to seal the carton as they can scratch the cabinet. Please save the carton and all
packaging materials for future use. Packing this unit in any other carton may result in severe damage when
shipping. Record the serial number in the space provided on the warranty card for future reference.
Product Features
• 230V
• 8” (6.5” piston diameter) driver with 2.5” high-temp voice coil and 107 ounce magnet/204 ounce motor
structure
• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency Class D amplifier
• Adjustable (40 to 120 Hz) low-pass crossover (defeatable)
• Line-level (RCA) inputs and outputs
• LFE Input
• Speaker-level inputs with five way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0° or 180°)
• Frequency response of 28 - 120 Hz
• Multiple staggered low-pass crossovers; 12 dB/octave initial, 48 dB/octave ultimate
• Driver Displacement Control circuit prevents over excursion and amp clipping
• Blue power indicator LED
• High-excursion EPDM rubber surround
• Oversized spider for linearity at high excursion