Velodyne VRP Series - Manual (Page 14)

Specifications
11
.
w w w . v e l o d y n e . c o m
VRP User’s Manual
SPECIFICATIONS VRP-1000 VRP-1200
Woofer 10” (24.5 cm) 12” (30.5 cm)
forward firing foward firing
(8.2” piston diameter) (9.7” piston diameter)
Amplifier: Monolithic MOS 170 watts Dynamic/ 195 watts Dynamic/
Class A/B 115 watts RMS Power 130 watts RMS Power
Cabinet Design Acoustically neutral, Acoustically neutral,
rear ported rear ported
Frequency Response 35 -140 Hz 29 - 140 Hz
(+/-3 dB) (+/-3 dB)
Voice Coil 2” copper-wound 2” copper-wound
Cone Coated Fiber Coated Fiber
Speaker-Level Full Range Full Range
Pass-Through
Low-Pass Crossover 50 - 200 Hz 50 - 200 Hz
Outputs Left and right speaker Left and right speaker
level pass-through level pass-through
Inputs RCA Line Level, LFE and RCA Line Level, LFE and
Speaker Level inputs Speaker Level inputs
Phase 0° or 180° 0° or 180°
Auto On/Off Yes Yes
Removable Grill Yes Yes
Video Shielding Yes Yes
LED Power Indicator Yes Yes
Input Impedance 65K ohm
(for LINE INPUT jacks)
1.2K ohm
(for SPEAKER LEVEL INPUT terminals)
Sensitivity Speaker-Level 1.0V 1.0V
Line 100 mV 100 mV
Power Supply 120V, 60 Hz AC 120V, 60 Hz AC
Power Consumption 75 watts 75 watts
Cabinet (H,W,D) 15” x 12.1” x 16.1” 16.5” x 14.5” x 18.75”
(cm) with grill 38 x 31 x 41 42 x 37 x 48
Weight (approx.) 37 lbs. (17 Kg) 44 lbs. (20 Kg)
Specifications are subject to change without notice.