Vermona PERfourMER MKII - quad analog synthesizer - Manual (Page 6)

Getting Started
To ensure top quality we carefully inspected the PerFourMer MKII before
packaging. Nevertheless, the unit could have been damaged during trans-
portation. Therefore, we ask you to take a serious look at the instrument
when unpacking. Do not hesitate to contact us, should there be anything
unusual with the PerFourMer MKII itself or its packaging.
You should find the following items in the box:
• 1 PerFourMer MKII unit
• 1 power chord
• 1 set of rack brackets + mounting material
• this manual
Connections and Powering
If you came here without any problems, you can finally start up the Per-
FourMer MKII:
1. Connect the provided power chord to the PerFourMer MKII and a power
outlet.
2. Connect the stereo outputs, located on the rear, to appropriate audio
inputs of a mixing console, an audio-interface or an amplifier.
3. Connect the PerFourMer MKII's MIDI input to the MIDI output of a key-
board, a hardware-sequencer or a MIDI-interface, connected to your
DAW.
4. Press the POWER button to switch the PerFourMer MKII on. The blue
status LED above the MASTER TUNE control will now be lit blue.
5. Congratulations, the PerFourMer MKII has now been started.
Components and Controls
On one hand, the PerFourMer MKII is a four-voice polyphonic analogue syn-
thesizer with a classic voice structure. On the other hand, it offers four
independent synthesizer channels. These can either be used individually or
combined and played in some unique ways. The four synthesizer channels
are all independent synthesizers with a classic structure of VCO-VCF-VCA.
Tiny differences appear only when combining these synthesizers. We will
now take your through the different sections and the corresponding control
elements.
Owner's Manual VERMONA PERfourMER MKII
- 6 -