Vortech Universal Small Block Chevy Carbureted User Manual
Page 18
P/N: 4GP020-015 v3.0, 2012-03-26
©2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
8
E.
dual-Plate Applications Only:
1. Locate the supplied steel supercharger
mounting plate. Attach the plate to the
cast aluminum mounting bracket with
the two supplied 3/8-16 x 1” screws in
the locations shown in Fig 4.2-d. Do
not tighten the screws at this time.
They will be removed in a future step.
Leave finger tight.
2. Place the supercharger into position on
the steel supercharger mounting plate.
Lightly “snug” the two supplied 3/8-16 x
1” screws (with washers) into the super-
charger at the locations shown in Fig
4.2-d. Do not tighten the screws at this
time. Leave finger tight.
3. Locate the supplied aluminum super-
charger mounting plate. Loosely attach
the plate to the supercharger and
bracket assembly using five of the sup-
plied 3/8-16 x 2.75” screws (with wash-
ers) and 1.434” long spacers.
Sandwich the spacers between the two
mounting plates.
4. Remove the two 3/8-16 x 1” screws that
were temporarily installed into the
bracket in a previous step. Attach the
two remaining sets of 3/8-16 x 2.75”
screws (with washers) and 1.434” long
spacers. Tighten all hardware. (See
Fig. 4.2-e.).
4.2-e
4.2-d