Watchguard, Firebox, X quickstart guide – WatchGuard Firebox X Core User Manual

Page 2: Getting started, Selecting a firewall configuration mode, Routed configuration (figure 1)

Advertising
background image

2

WatchGuard

®

Firebox

®

X QuickStart Guide

Getting Started

WatchGuard® Firebox® X has the security you really need. A fully integrated appliance, it contains powerful
layered network security, intuitive management and premium support through LiveSecurity Service. This
QuickStart Guide covers the initial installation of WatchGuard Firebox X. Please refer to your Hardware Guide
and User Guide for hardware specifications and comprehensive setup instructions.

Check Package Contents

WatchGuard Firebox X appliance

QuickStart Guide

User Documentation

One serial cable (blue)

Ethernet crossover cable (red)

Three Ethernet cables (green)

Power cable

WatchGuard System Manager CD

License Key Certificate

Selecting a Firewall Configuration Mode

Important! Before installing the WatchGuard Firebox X, you need
to decide how to incorporate the Firebox X into your network. To
begin, select the configuration mode that most closely reflects
your existing network. There are two possible options: Routed and
Drop-in Configuration. The choices you make here will be used in step 5.

Routed Configuration (Figure 1)

This configuration is necessary when the number of
public IP addresses is limited or when you have
dynamic IP addressing on the external interface. The
Firebox is put into place with separate logical net-
works and separate network addresses on each of its
interfaces. Most networks are best served by a
Routed configuration. Public servers behind the
Firebox use private addresses, and traffic is routed
using network address translation.

NOTE: Please read the

entire QuickStart Guide
before beginning the install
process.

Review Steps for Installation

Selecting a firewall configuration mode

Gathering network information

Setting up a management station

Cabling the Firebox X

Running the QuickSetup Wizard

Deploying the Firebox X into your network

Registering your LiveSecurity® Service

Option 1: Routed Configuration

Figure 1

Router

24.4.5.1/24

External

Interface

24.4.5.7/24

Optional Interface

192.168.10.254

Trusted Interface

10.10.10.254

Internet

1

Advertising